LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 671 (Body Rear End) >> Repair Instructions >> Rear Body Opening Frame Drain Valve Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Body Opening Frame Drain Valve (Front)
    GM803917Courtesy of GENERAL MOTORS CORP.
  1. Align the drain valve into the opening in the floor.
  2. Press down on the drain valve to fully seat the valve into the floor.
  3. Install the cargo load mat.
  4. Install the compartment cover.
  5. Close the mid gate.
scientia non olet · About LEMON Manuals