LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 671 (Body Rear End) >> Repair Instructions >> Panel Replacement - Removable Rear - Midgate >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removable Rear Panel (Midgate)
    GM741392Courtesy of GENERAL MOTORS CORP.
  1. Install the panel to the vehicle
  2. Install the Hinges to the panel. Refer to Hinge Replacement - Removable Rear Panel - Midgate 
  3. Check the operation of the mid gate by opening and closing the mid gate.

    Align the mid gate if necessary.

  4. Fold the rear seat back up.
scientia non olet · About LEMON Manuals