LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 671 (Body Rear End) >> Repair Instructions >> Lock Cylinder Replacement - Liftgate >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the trim panel. Refer to Trim Panel Replacement - Liftgate .
  2. Remove the liftgate window latch assembly. Refer to Latch Replacement - Liftgate .
    3. Fig 1: Removing Liftgate Lock Cylinder
    GM570311Courtesy of GENERAL MOTORS CORP.
  3. Depress the locking pin on the lock cylinder.
  4. Turn lock cylinder counterclockwise.
  5. Remove the liftgate lock cylinder from the latch assembly.
scientia non olet · About LEMON Manuals