LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 671 (Body Rear End) >> Repair Instructions >> Liftgate Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing Liftgate
    GM522132Courtesy of GENERAL MOTORS CORP.
  1. Open the lift gate.
  2. Support the lift gate.
  3. Remove the roof rear header garnish molding. Refer to GARNISH MOLDING REPLACEMENT - REAR UPPER (TAHOE/YUKON/ESCALADE/SUBURBAN) or GARNISH MOLDING REPLACEMENT - REAR UPPER (AVALANCHE/ESCALADE EXT) .
  4. Disconnect the electrical connectors, as needed.
  5. Disconnect the lift gate window washer fluid hose.
  6. Remove the lift gate struts. Refer to Strut Replacement - Liftgate .
  7. Remove the bolts retaining the lift gate hinge to the body mounted hinge locator.
  8. With an assistant, remove the lift gate.
scientia non olet · About LEMON Manuals