Installation Procedure
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Install the actuator cable assembly to the latch.
- Connect electrical connector, if required.
- Install the bolts that retain the latch assembly to the door.
Tighten: Tighten the bolts to 25 N.m (18 lb ft).
NOTE:
Refer to FASTENER NOTICE
.