LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 671 (Body Rear End) >> Repair Instructions >> Hinge Replacement - Tethered - Cargo Storage >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing Lower Hinge Retainers
    GM1207325Courtesy of GENERAL MOTORS CORP.
  1. Remove the stowage compartment lid from the vehicle. Refer to Lid Replacement - Cargo Box Stowage Box (Avalanche) .
  2. Remove the retainers (1) from the lower hinge.
  3. Fig 2: Removing Upper Hinge Screws
    GM1207330Courtesy of GENERAL MOTORS CORP.
  4. Remove the screws (1) from the upper hinge.
  5. Remove the hinge from the stowage compartment assembly.