LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 671 (Body Rear End) >> Repair Instructions >> Garnish Molding Replacement - Rear Door Frame >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Door Frame Garnish Molding
    GM791376Courtesy of GENERAL MOTORS CORP.
  1. Open the rear door.
  2. Pry gently with a thin bladed tool in order to remove the retaining clips.
  3. Remove the garnish molding from the door.
scientia non olet · About LEMON Manuals