LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 671 (Body Rear End) >> Repair Instructions >> Garnish Molding Replacement - Liftgate >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Liftgate Garnish Molding
    GM784739Courtesy of GENERAL MOTORS CORP.
  1. Open the liftgate window.
  2. Remove the push pin retainers from the garnish molding.
  3. Pry gently with a thin-bladed tool in order to release the retaining clips.
  4. Remove the garnish molding.
scientia non olet · About LEMON Manuals