LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 671 (Body Rear End) >> Repair Instructions >> Floor Trim Plate Replacement - Rear (Avalanche/Escalade EXT) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Floor Trim Plate (Avalanche/Escalade EXT)
    GM823574Courtesy of GENERAL MOTORS CORP.
  1. Install the rear floor trim plate (1) to the vehicle.
  2. Install the hinges to the mid gate. Refer to Hinge Replacement - Removable Rear Panel - Midgate .
  3. Install the third pillar trim. Refer to TRIM REPLACEMENT - THIRD PILLAR (TAHOE/YUKON/ESCALADE/SUBURBAN) or TRIM REPLACEMENT - THIRD PILLAR (AVALANCHE/ESCALADE EXT) .