LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 671 (Body Rear End) >> Repair Instructions >> Endgate Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lower the endgate.
    2. Fig 1: Endgate & Theft Deterrent Bolt
    GM352939Courtesy of GENERAL MOTORS CORP.
  2. Remove the theft deterrent bolt.
  3. With an assistant, raise the endgate to a 45 degree angle.
    4. Fig 2: View Of Support Cable At Mounting Bolt
    GM388060Courtesy of GENERAL MOTORS CORP.
  4. Remove the cable on each side from the side panel striker bolts.
  5. Remove the endgate from the right side hinge assembly by lifting up on the right side.
  6. With an assistant, remove the endgate from the left body side hinge by sliding to the right and lifting.
scientia non olet · About LEMON Manuals