LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 671 (Body Rear End) >> Repair Instructions >> Box Replacement - Cargo Stowage (Avalanche) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Cargo Stowage Box (Avalanche)
    GM741587Courtesy of GENERAL MOTORS CORP.
  1. Install the cargo box stowage box to the vehicle.
    2. NOTE: Refer to FASTENER NOTICE .
  2. Install the cargo tie-down rings and bolts to the body side inner panel.

    Tighten:  Tighten the bolts to 9 N.m (80 lb in).

  3. Install the cargo box stowage lid assembly. Refer to Lid Replacement - Cargo Box Stowage Box (Avalanche) .
  4. Install the lamp socket to the pickup box side courtesy lamp assembly.
  5. Install the assist handle. Refer to Assist Handle Replacement - Endgate (Avalanche) .
  6. Install the rear compartment cover assembly.
scientia non olet · About LEMON Manuals