LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 668 (Lighting Systems) >> Repair Instructions >> Park/Turn Signal Lamp Replacement (Avalanche) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the hood.
    2. Fig 1: Park/Turn Retainer Pins
    G01696781Courtesy of GENERAL MOTORS CORP.
  2. Rotate the park/turn retainer pins.
  3. Remove the park/turn retainer pins.
    4. Fig 2: Park/Turn Assembly
    G01696782Courtesy of GENERAL MOTORS CORP.
  4. Pull out the park/turn assembly in order to access the electrical connector.
  5. Disconnect the electrical connector.
    6. Fig 3: Park/Turn Assembly Bulb
    G01696783Courtesy of GENERAL MOTORS CORP.
  6. Remove the bulb from the park/turn assembly by twisting the bulb counterclockwise.
scientia non olet · About LEMON Manuals