LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 668 (Lighting Systems) >> Repair Instructions >> High Mounted Stop Lamp Replacement (Escalade EXT) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: High Mounted Stop Lamp Assembly
    G01696796Courtesy of GENERAL MOTORS CORP.
  1. Install the lamp assembly to the cargo box bridge center bar.
    2. Fig 2: Electrical Connector
    G01696797Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connector.
  3. Install the cargo box bridge center bar. Refer to PANEL REPLACEMENT - CARGO BOX BRIDGE CENTER (AVALANCHE) or PANEL REPLACEMENT - CARGO BOX BRIDGE CENTER (ESCALADE EXT) .
  4. Inspect the operation.
    5. Fig 3: Stoplamp Retaining Screws
    G01696798Courtesy of GENERAL MOTORS CORP.
  5. Install the rear compartment cover assembly.
scientia non olet · About LEMON Manuals