LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 667 (Seat Belt System) >> Repair Instructions >> Seat Belt Retractor Replacement - No. 2 Rear (Bench) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat back cover and pad. Refer to SEAT BACK COVER AND PAD REPLACEMENT - REAR (60/40 - 50/50 SPLIT) or SEAT BACK COVER AND PAD REPLACEMENT - REAR (BENCH) .
  2. Remove the seat belt retractor bolt (1) from the seat frame.
    Fig 1: Rear Seat Belt Retractor Bolt (Bench)
    GM841688Courtesy of GENERAL MOTORS CORP.
  3. Remove the retractor.
scientia non olet · About LEMON Manuals