LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 667 (Seat Belt System) >> Repair Instructions >> Seat Belt Buckle Replacement - No. 2 Rear (Bench) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat cushion cover. Refer to SEAT CUSHION COVER AND PAD REPLACEMENT - REAR (60/40 - 50/50 SPLIT) or SEAT CUSHION COVER AND PAD REPLACEMENT - REAR (BENCH) .
    Fig 1: View Of No. 2 Rear Seat Belt Buckle Assembly & Bolts (Bench)
    GM841692Courtesy of GENERAL MOTORS CORP.
  2. Remove the bolt (1) from the buckle assembly.
  3. Remove the buckles from the seat frame.
scientia non olet · About LEMON Manuals