LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 667 (Seat Belt System) >> Repair Instructions >> Seat Belt Buckle Replacement - No. 2 Rear (60/40 Split - 50/50 Split) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the handle mounting screws (1).
    Fig 1: Handle Mounting Screws
    GM768627Courtesy of GENERAL MOTORS CORP.
  2. Partially Remove the seat cushion cover by separating the cushion trim J-strips.
    3. Fig 2: View of No. 2 Rear Seat Belt Buckle (60/40 Split - 50/50 Split)
    GM768629Courtesy of GENERAL MOTORS CORP.
  3. Remove the bolts attaching the buckle to the seat cushion frame.
  4. Remove the buckle from the seat frame.
scientia non olet · About LEMON Manuals