LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 664 (Transfer Case - NVG 261-NP2 (2-Speed Manual)) >> Repair Instructions >> Transfer Case Speed Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the transfer case speed sensor. Tighten the transfer case speed sensor to 20 N.m (15 ft lbs).
  2. Install the transfer case speed sensor electrical connector.
  3. Lower the vehicle.
scientia non olet · About LEMON Manuals