LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 664 (Transfer Case - NVG 261-NP2 (2-Speed Manual)) >> Repair Instructions >> Transfer Case Output Shaft Seal Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the J 43484  (2) to the J 8092  (1).
  2. Install the transfer case front output shaft seal on the J 43484  (2).
  3. Using the J 43484  (2) and the J 8092  (1), install the transfer case output seal.
  4. Install the front propeller shaft. Refer to PROPELLER SHAFT REPLACEMENT - FRONT .
  5. Check the transfer case fluid level. Refer to Transfer Case Fluid Replacement .
  6. Install the transfer case shield. Refer to Transfer Case Shield Replacement .
  7. Lower the vehicle.
scientia non olet · About LEMON Manuals