LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 663 (Transfer Case - NVG 246-NP8 (2-Speed Automatic)) >> Repair Instructions >> Transfer Case Speed Sensor Replacement (Front) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the transfer case front speed sensor into the transfer case. Tighten the transfer case front speed sensor to 15 N.m (11 lb ft).
  2. Install the transfer case front speed sensor electrical connector.
  3. Install the transfer case shield. Refer to Transfer Case Shield Replacement .
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals