LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 651 (Power Seat System) >> Repair Instructions >> Seat Cushion Cover and Pad Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora and 2001 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the seat cushion cover (2) over the foam pad (1).
  2. Work the cover over the foam cushion and engage the cover J channels to the seat cushion frame.
  3. Install the screws to retain the J channels.
  4. Install the rear seat cushion. Refer to Seat Cushion Replacement - Rear  .
    Fig 1: Identifying Seat Cushion Cover & Pad
    G01803945Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals