LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 651 (Power Seat System) >> Repair Instructions >> Seat Back Cover and Pad Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora and 2001 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the seat back pad to the seat back frame.
  2. Install the seat back cover (1) over the seat back pad and frame assembly.
  3. Work the cover (1) and pad into position over the frame so there are no wrinkles or lumps in the seat back cover or pad.
  4. Install the hog rings in order to secure the cover (1) to the rear seat back frame.
  5. Install the rear seat armrest to the seat back. Refer to Armrest Replacement - Rear Seat  .
  6. Install the seat back assembly to the vehicle. Refer to Seat Back Replacement - Rear  .
    Fig 1: Identifying Seat Back Cover & Pad
    G01803947Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals