LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 651 (Power Seat System) >> Repair Instructions >> Head Restraint Replacement - Front Seat >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora and 2001 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the head restraint shafts to the holes in the head restraint retainers (1).
  2. Slide the head restraint down until fully seated on the top of the seat back.
  3. Move the head restraint to the desired position.
    Fig 1: Installing Head Restraint
    G01803938Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals