LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 650 (Instrument Panel, Gauges & Console) >> Repair Instructions >> Lock Cylinder Replacement - IP Compartment Door >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora and 2001 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the IP compartment handle. Refer to HANDLE REPLACEMENT - IP Compartment  .
  2. Insert the key into the IP compartment door lock cylinder.
  3. Insert a small diameter tool into the slot on the upper side of the door handle cylinder housing and depress and hold the lock cylinder retainer.
  4. While the lock cylinder retainer is still depressed, turn the key 1/4 turn counterclockwise.
  5. Pull to remove the lock cylinder.
    Fig 1: Removing IP Compartment Door Lock Cylinder
    G01803092Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals