LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 650 (Instrument Panel, Gauges & Console) >> Repair Instructions >> Bracket Replacement - Steering Column >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora and 2001 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the steering column bracket to the IP carrier.
    CAUTION: Refer to FASTENER NOTICE .
  2. Install the steering column bracket fasteners.

    Tighten 

    Tighten the fasteners to 9 N.m (80 in lbs).

  3. Install the knee bolster. Refer to Bracket Replacement - Knee Bolster  .
    Fig 1: Installing Steering Column Bracket
    G01803117Courtesy of GENERAL MOTORS CORP.