LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 650 (Instrument Panel, Gauges & Console) >> Repair Instructions >> Bracket Replacement - IP End >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora and 2001 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disable the SIR system. Refer to DISABLING SYSTEM .
  2. Remove the IP carrier. Refer to IP Carrier Replacement  .
  3. Remove the fasteners from the IP end bracket to the hinge pillar.
  4. Remove the IP end bracket.
    Fig 1: Removing IP End Bracket
    G01803114Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals