LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Engine Mechanical - 6.6L (On-Vehicle)) >> Removal & Installation >> Turbocharger Oil Supply Hose >> Installation

Turbocharger Oil Supply Hose: Installation

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Install oil supply hose and NEW sealing washers. Each end of oil supply hose has different bend angles. Ensure 90 degree bend is towards turbocharger. Align hose as shown to clear turbocharger lower heat shield. Install oil supply hose eye bolt. Install turbocharger. See TURBOCHARGER .

scientia non olet · About LEMON Manuals