LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Engine Mechanical - 6.6L (On-Vehicle)) >> Removal & Installation >> Intake Manifold >> Removal (Left)

Removal (Left)

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove turbocharger assembly. Remove fuel junction block. Remove left fuel rail assembly. Remove intake manifold tube. See INTAKE MANIFOLD TUBE .
  2. Remove 9 bolts and 2 nuts from intake manifold. A bolt is located in intake manifold opening. The intake manifold uses sealer. Pry at area by common rail bolt holes. Avoid damage to sealing surfaces.
  3. Remove intake manifold from cylinder head. To prevent entry of debris in cylinder head, tape openings.
scientia non olet · About LEMON Manuals