LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Engine Mechanical - 6.6L (On-Vehicle)) >> Removal & Installation >> Exhaust Manifold >> Installation (Right)

Installation (Right)

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install exhaust manifold gasket to cylinder head. See Figure. Install bolt for oil level indicator tube bracket. Install exhaust manifold. Install exhaust manifold bolts/nuts.
  2. Use sequence shown, properly tighten exhaust manifold bolts. See Figure.
  3. Install exhaust manifold heat shield. Install exhaust manifold heat shield bolts. Install exhaust pipe gasket. Align tab on gasket to face outward. Install exhaust pipe bolts.
  4. Install wheelhouse panel. Install front tire and wheel, if necessary. Lower vehicle.
scientia non olet · About LEMON Manuals