LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Engine Mechanical - 6.6L (On-Vehicle)) >> Removal & Installation >> Crankshaft Balancer >> Installation

Crankshaft Balancer: Installation

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lightly lubricate crankshaft balancer internal hub with engine oil. Install crankshaft balancer on crankshaft. Lightly lubricate crankshaft balancer bolt with engine oil. Install & tighten crankshaft balancer bolt.
  2. Raise vehicle. Remove flywheel holding tool. Install starter motor and bolts. Install right front fender wheelhouse panel. Lower vehicle. Install upper and lower fan shroud. Connect battery cables.
scientia non olet · About LEMON Manuals