LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 649 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Windshield Pillar >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pull the windshield pillar garnish molding away from the windshield pillar to disengage the retainer clips.
  2. Remove the windshield pillar garnish molding.
    Fig 1: Removing Windshield Pillar Garnish Molding
    G01803980Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals