LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 649 (Interior Trim) >> Repair Instructions >> Garnish Molding Replacement - Windshield Pillar >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the lower the end of the windshield pillar garnish molding behind instrument panel cover.
  2. Align the clips to the holes in the windshield pillar.
  3. Push in on the windshield pillar garnish molding to engage the retainer clips.
    Fig 1: Installing Windshield Pillar Garnish Molding
    G01803981Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals