LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 647 (Bumper System) >> Repair Instructions >> License Pocket Cover Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fasteners (2) from the underside of the front bumper fascia (1).
  2. Pull the bottom of the front license pocket cover outward.
  3. Pull the license pocket cover downward to remove.
    Fig 1: Removing License Pocket Cover
    G01803299Courtesy of GENERAL MOTORS CORP.