LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 647 (Bumper System) >> Repair Instructions >> License Pocket Cover Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert the tabs on the top of the license pocket cover into the slots in the license pocket of the fascia.
  2. Push the cover upward to engage the tabs.
  3. Align the holes in the license pocket cover to the holes in the front bumper fascia.
  4. Install the fasteners (2) into the fascia (1).
    Fig 1: Installing License Pocket Cover
    G01803300Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals