LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 646 (Body Front End) >> Repair Instructions >> Seal Replacement - Hood Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a common trim pad clip removal tool, carefully work the seal (1) off the hood from side to side.
  2. Remove the front hood seal from the hood.
    Fig 1: Removing Hood Front Seal
    G01803372Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals