LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 646 (Body Front End) >> Repair Instructions >> Hood Latch Striker Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the hood striker to the marks on the underside of the hood.
    CAUTION: Refer to FASTENER NOTICE .
  2. Install the fasteners to retain the hood striker to the hood.

    Tighten 

    Tighten the fasteners to 9 N.m (80 in lbs).

  3. Close the hood.
    Fig 1: Installing Hood Latch Striker
    G01803344Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals