LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 646 (Body Front End) >> Repair Instructions >> Hood Insulator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the hood.
  2. Remove the Front Hood Seal. Refer to Seal Replacement - Hood Front  .
  3. Remove the push in retainers retaining the hood insulator to the hood.
  4. Remove the hood insulator from the hood.
    Fig 1: Removing Hood Insulator
    G01803345Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals