LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 644 (Power Seat System) >> Repair Instructions >> Seat Cushion Retainer Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the retaining cup (1) onto the wire frame (2) at the bottom of the seat cushion (3).
    2. Fig 1: Identifying Seat Cushion Retainer Black Retaining Cup
    G01756183Courtesy of GENERAL MOTORS CORP.
  2. Press down on the retaining cup in order to secure the retainer to the wire frame.
  3. Install the seat cushion. Refer to Seat Cushion Replacement - Rear .
scientia non olet · About LEMON Manuals