LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 644 (Power Seat System) >> Repair Instructions >> Seat Back Latch Replacement - Rear (Folding Seat) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat back cover. Refer to Seat Back Replacement - Rear (Non-Folding)  or Seat Back Replacement - Rear (Folding)  .
  2. Disconnect the rear seat back latch cable from the rear seat back latch.
    Fig 1: Identifying Rear (Folding Seat) Seat Back Latch
    G01756225Courtesy of GENERAL MOTORS CORP.
  3. Remove the rivets from the rear set back latch.
    4. Fig 2: Removing Seat Back Latch Rivets
    G01756226Courtesy of GENERAL MOTORS CORP.
  4. Remove the rear seat back latch from the rear seat back frame.
scientia non olet · About LEMON Manuals