LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 644 (Power Seat System) >> Repair Instructions >> Seat Back Latch Replacement - Rear (Folding Seat) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the rear seat back latch cable to the rear seat back latch.
    2. Fig 1: Identifying Rear (Folding Seat) Seat Back Latch
    G01756227Courtesy of GENERAL MOTORS CORP.
  2. Position the rear seat back latch to the rear seat back frame.
  3. Install the rivets to the rear seat back latch.
  4. Install the rear seat back cover. Refer to Seat Back Replacement - Rear (Non-Folding)  or Seat Back Replacement - Rear (Folding)  .
scientia non olet · About LEMON Manuals