LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 644 (Power Seat System) >> Repair Instructions >> Seat Adjuster Track Cover Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the rear seat track adjuster covers to the rear of the adjuster power seats.
    Fig 1: Identifying Rear Seat Adjuster Track Cover - Power Seat
    G01756134Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the rear manual seat adjuster track cover retaining screw to the rear adjuster track cover manual seat. Tighten the screw to 2 N.m (18 lb in).
    Fig 2: Identifying Rear Seat Adjuster Track Cover - Manual Seat
    G01756135Courtesy of GENERAL MOTORS CORP.
  3. Install the front seat track adjuster cover to the front seat adjuster manual and the power seats.
    Fig 3: Identifying Front Seat Adjuster Track Cover
    G01756136Courtesy of GENERAL MOTORS CORP.