LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 642 (Body Rear End) >> Repair Instructions >> Compartment Sill Plate Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the spring clips to slots in rear compartment.
  2. Press down on the rear compartment sill plate with even pressure until fully seated.
  3. Fig 1: Identifying Compartment Sill Plate
    G01756329Courtesy of GENERAL MOTORS CORP.
  4. Close the rear compartment.