LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Servicing - A/T (AF33-5)) >> Lubrication >> Oil Cooler Flushing

Oil Cooler Flushing

WARNING: This page is about a different car, the 2002 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Oil Line Cooler Flusher (SA9165T) should be used when flushing of transaxle oil cooler in radiator assembly is required. Follow instructions provided with the tool when performing flushing procedure.
  2. Cooler Flusher Adapter (J35944-440) is used in combination with flushing tool and allows you to attach cooler flusher to transaxle oil cooler line assembly and flush cooler and cooler lines at the same time.
  3. The transaxle oil cooler and lines should be flushed in any of the following situations:
    • Performing a transaxle replacement.
    • Oil cooler lines should be flushed after oil cooler replacement.
    • Any internal transaxle failure that caused debris (clutch plate material, metal shavings, etc.) to enter the transaxle oil cooler and oil cooler lines.
scientia non olet · About LEMON Manuals