LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 638 (Engine Mechanical - 4.0L (Unit Repair)) >> Repair Instructions >> Camshaft Intermediate Drive Shaft Installation

Camshaft Intermediate Drive Shaft Installation

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora and 2001 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Refer to FASTENER NOTICE in Cautions and Notices.

Install the intermediate sprocket shaft (1) and the retaining bolts.

Tighten 

Tighten the intermediate sprocket shaft bolts to 10 N.m (89 in lbs).

Fig 1: Installing Intermediate Sprocket Shaft
G01817287Courtesy of GENERAL MOTORS CORP.