LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 636 (Rear Wheel Steering System) >> Repair Instructions >> Rear Wheel Steering Tie Rod End Replacement - Outer >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the outer tie rod end to the inner tie rod.
  2. Install the outer tie rod end to the steering knuckle.
  3. Install the outer tie rod end retaining nut to the steering knuckle. Tighten the nut to 55 N.m (40 ft lbs).
  4. Install the outer tie rod end retaining bracket (2). Tighten the retaining bolts to 65 N.m (48 ft lbs).
  5. Install the tire and wheel.
  6. Perform a four wheel alignment. Refer to SPECIFICATIONS .
  7. Tighten the tie rod jam nut. Tighten the nut to 65 N.m (48 ft lbs).
scientia non olet · About LEMON Manuals