Fastener Tightening Specifications
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Horn Contact Plate Screws | 5.5 N.m | 50 lb in |
| Intermediate Shaft Coupler Bolt | 50 N.m | 37 lb in |
| Intermediate Shaft Pinch Bolt | 47 N.m | 35 lb ft |
| Knee Bolster Deflector | 9 N.m | 80 lb in |
| Linear Shift Assembly to Steering Column Mounting Screws | 10 N.m | 89 lb in |
| Lock Module Assembly Screws | 7 N.m | 62 lb in |
| Lower Column Cover Screws | 3 N.m | 25 lb in |
| Multifunction Turn Signal/Hazard Switch Screws | 6 N.m | 53 lb in |
| Shift Lever Gate Screws | 6.5 N.m | 58 lb in |
| Shift Lever to Steering Column Screw | 1.5 N.m | 13 lb in |
| Steering Column Bracket Nuts | 30 N.m | 22 lb ft |
| Steering Column Bulkhead Connector Screw | 6 N.m | 53 lb in |
| Steering Column Seal Nuts | 3 N.m | 25 lb ft |
| Steering Wheel Nut | 40 N.m | 29 lb ft |
| Upper Column Cover Screw | 1.5 N.m | 15 lb in |