LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 635 (Steering Wheel And Steering Column) >> Repair Instructions >> Turn Signal Switch Housing - Disassemble - Off Vehicle (Standard)

Turn Signal Switch Housing - Disassemble - Off Vehicle (Standard)

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disable the inflatable restraint steering wheel module. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM .
  2. Remove the turn signal cancel cam and upper bearing thrust. Refer to Turn Signal Cancel Cam & Bearing Thrust Washer - Disassemble - Off Vehicle .
  3. Remove the turn signal and multifunction switch assembly only. Refer to Turn Signal & Multifunction Switch Assembly - Disassemble - Off Vehicle .
  4. Slide the turn signal switch housing off of the steering column shaft assembly.
    Fig 1: Steering Column Shaft Assembly
    G01667326Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals