LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 635 (Steering Wheel And Steering Column) >> Repair Instructions >> Steering Wheel Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the marks made during the removal procedure on the steering shaft and the steering wheel.
  2. Install the steering wheel onto the steering shaft.
  3. Install the steering wheel nut to the steering shaft. Tighten the nut to 40 N.m (29 lb ft).
  4. Install the horn switch. Refer to Horn Switch Replacement - On Vehicle .
  5. Install the inflator module. Refer to AIR BAG MODULES .
  6. Enable the SIR system. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM .
scientia non olet · About LEMON Manuals