LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 631 (Tire Pressure Monitoring System) >> Repair Instructions >> Tire Pressure Monitor Reset Procedure >> Using the DIC

Using the DIC

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set all tire pressures to manufacturers specifications.
  2. Turn ON the ignition with the engine OFF.
  3. Press the SELECT right arrow button until GAGE is displayed.
  4. Press the SELECT down arrow button until TIRE PRESSURE is displayed.
  5. Press and hold the RESET button until TIRE PRESSURE RESET is displayed.
  6. Release the RESET button and TIRE PRESSURE NORMAL is displayed.
  7. Use the scan tool in order to clear the TPM DTC.
scientia non olet · About LEMON Manuals