LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Shift Interlock Systems) >> Removal & Installation >> Instrument Panel Cluster Bezel Trim Plate >> Installation

Instrument Panel Cluster Bezel Trim Plate: Installation

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, 2002 Chevrolet RV Cutaway, and 2002 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the instrument panel cluster trim plate to the vehicle. See Fig 1 . Connect the headlight switch and the heater control switch to the instrument panel cluster trim plate by pressing on the switches in order to engage the retainers.
  2. Rotate the instrument panel cluster trim plate clockwise over the steering column. Connect the electrical connectors to the switches in the instrument panel cluster trim plate. Press the instrument panel cluster trim plate in order to engage the retainers.
  3. Install the instrument panel cluster lower trim panel to the instrument panel cluster trim plate. Move the shift lever to the Park position. Remove the blocks from the wheels. Release the parking brake.
Fig 1: Removing & Installing Instrument Panel Cluster Bezel Trim Plate
G00079838Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals