LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 629 (Power Steering System) >> Repair Instructions >> Power Steering Pulley Replacement (LX5) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the drive belt. Refer to DRIVE BELT REPLACEMENT in Engine Mechanical-3.5L.
  2. Install J 25034-C  to the power steering pulley.
  3. Using J 25034-C  remove the power steering pump pulley.
    Fig 1: Removing Power Steering Pump Pulley
    G01581712Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals